Bloodgood Japanese Maple

Sunlight

Maintain partial shade for best color. In hot climates, provide some afternoon shade protection.

Soil

Ensure well-drained soil. Amend with organic matter if necessary to improve drainage.

Watering

Water regularly, especially during hot weather. Aim for deep watering, allowing the soil to dry slightly between waterings.

Fertilizing

Apply a slow-release fertilizer in early spring to encourage healthy new growth.

Pruning

Minimal pruning is required. Remove dead, diseased, or overcrowded branches in late winter or early spring.

Winter Care

In colder climates, consider mulching around the base of the tree to protect roots from harsh winter temperatures.

When It Arrives

Your newly arrived Bloodgood Japanese Maple will likely be thirsty after its journey. Give it a deep watering upon arrival, soaking the soil thoroughly until water runs from the drainage holes.

During the First Year

Consistent moisture is crucial for establishing a strong root system. Water your Bloodgood Japanese Maple 2-3 times a week during hot weather, or whenever the top 1-2 inches of soil feel dry to the touch. Aim for deep watering, allowing the water to penetrate the root zone. A slow, soaking application with a hose at the base of the tree is more effective than shallow sprinklers.

After the First Year

As your Bloodgood Japanese Maple matures, its watering needs become less frequent. Water deeply once a week during dry periods, allowing the soil to dry slightly between waterings.

Monitor your tree closely, especially during hot and dry spells. Signs of thirst include wilting leaves and drooping branches. Be mindful of overwatering, as this can damage the roots. If water pools on the surface after watering or runs off quickly, adjust your watering frequency or technique.

When It Arrives

Your new Bloodgood Japanese Maple likely has enough slow-release fertilizer from the nursery to sustain it for the first year. Avoid additional fertilization during this initial period.

During the First Year

You can skip fertilizing during the first year as the tree establishes itself in your landscape. The existing fertilizer in the soil should be sufficient.

After the First Year

In early spring, before new growth appears, apply a light dose of slow-release fertilizer formulated for acid-loving plants. Follow the application instructions on the fertilizer package carefully, as over-fertilizing can harm your tree.

Less is more. Bloodgood Japanese Maples prefer a balanced, low-nitrogen fertilizer. Too much nitrogen can lead to excessive green growth at the expense of vibrant fall color. You can also consider using organic alternatives like composted manure or composted leaves spread around the base of the tree in early spring.

What You’ll Need

Use sharp bypass pruners or lopping shears for thicker branches, pruning gloves for safety and a disinfectant (rubbing alcohol or a 10% bleach solution.

Steps for Pruning

Prune in late winter or early spring while the tree is dormant. Avoid pruning during hot weather or when the tree is flowering. Focus on removing dead, diseased, or overcrowded branches. These may appear brown, brittle, or have signs of insect damage.

When removing a branch, make clean cuts at a 45-degree angle just above a bud or outward-facing branch collar. Avoid cutting flush with the trunk or leaving stubs. For larger branches (over 1 inch thick), use the three-cut method to prevent bark tearing: make a small undercut on the underside of the branch a few inches from the trunk, then make a clean cut above it, and finally remove the remaining stub.

Disinfect your pruning tools after each cut to prevent the spread of disease.

After Pruning Care

Apply a light coat of pruning sealer to larger cuts to encourage healing and prevent disease. However, avoid using sealers on very small cuts. Water your Bloodgood Japanese Maple thoroughly after pruning, especially if dry weather persists.

Monitor your tree for new growth and repeat pruning as needed over the years to maintain its desired shape. Remember, it’s always better to prune less than too much, so err on the side of caution. If you’re unsure about a major pruning cut, consult a certified arborist.

How much sun does a Bloodgood Japanese Maple need?

Partial shade is ideal for the most vibrant foliage color. Bloodgood Japanese Maples tolerate full sun in cooler climates, but avoid harsh afternoon sun.

How tall will a Bloodgood Japanese Maple get?

Bloodgood Japanese Maples are known for their compact size, typically maturing to a height of 15-20 feet with a similar spread.

How fast does a Bloodgood Japanese Maple grow?

Bloodgood Japanese Maples are considered moderate growers, maturing at a rate of 1-2 feet per year.

What kind of soil does a Bloodgood Japanese Maple need?

Well-drained soil is crucial. Bloodgood Japanese Maples prefer slightly acidic to neutral soil (pH 5.0 to 7.0). Amend the soil if necessary with organic matter or lime to achieve the desired pH level.

How do I water a Bloodgood Japanese Maple?

Consistent moisture is essential, especially during the first year. Water your Bloodgood Japanese Maple 2-3 times a week during hot weather, allowing the top 1-2 inches of soil to dry slightly between waterings. After the first year, water deeply once a week during dry periods.

Do I need to fertilize a Bloodgood Japanese Maple?

Bloodgood Japanese Maples are relatively low-maintenance and don’t require frequent fertilization. A light application of slow-release fertilizer formulated for acid-loving plants in early spring is sufficient.

How do I prune a Bloodgood Japanese Maple?

Minimal pruning is required to maintain the natural beauty of the Bloodgood Japanese Maple. Prune in late winter or early spring, focusing on removing dead, diseased, or overcrowded branches. Make clean cuts at a 45-degree angle just above a bud or outward-facing branch collar.